Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13637972
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
- home > Supply > Qingdao Compressor overhaul _ Ke Pule compressor (certified) _ compressor maintenance
Information Name: | Qingdao Compressor overhaul _ Ke Pule compressor (certified) _ compressor maintenance |
Published: | 2015-04-29 |
Validity: | 0 |
Specifications: | Limited |
Quantity: | |
Price Description: | |
Detailed Product Description: | For blower bearing oil leakage problem, apply the installation of a suction device to remove the bearing oil spill transformation. Vacuum pumping apparatus imported oil suction blower duct, although solved lubricant oil pollution caused by the blower bearing and ground problem, but the oil is drawn into the blower Xinjiang Compressor overhaul, lubricating oil accumulated in the blower housing blower impeller pollution, increased use of lubricating oil, fill the oil more frequently. By improving the labyrinth, install exhaust cap, the installation of the cabinet felt seals and other measures, it has yielded some results compressor maintenance, but does not fundamentally solve the leakage problem. With the unit running time close to the overhaul of the host, the host bearing life gradually getting into the maximum permitted time period. In this case the screw axial and radial runout gradually getting into the maximum value of Qingdao compressor design allows maintenance, this change will make between the screw and the screw, screw gap with the host of the housing and between the front and rear end faces there is a greater change. The host is running, although still safe, but have come to consider scheduling time for a major overhaul of the host. Because once over the overhaul of the unit running time, with the gap bearing wear and host mainframe technology reached the limit conditions permit, Wuhan Tips compressor industry giant, this time the host is in unsafe operating state, at any time There are serious consequences may occur sucked air filter dust in the air is blocked in the filter, in order to avoid premature wear of the compressor and oil separator is blocked, usually in operation after 1000 hours or one year, To replace the filter, in dusty areas, the change interval should be shortened. Filter maintenance must be shut down, in order to reduce downtime, we recommend to put a new or cleaned filter spare. Clean the filter as follows:. A flat surface in front of a filter end surfaces turns tapping to remove most of the heavy and dry Fui Sha. b. Use of less than 0.28MPa, dry air along the direction opposite to the intake air blow nozzle with less folded sheets 25 mm apart, along its length, the next blow. c. If there is oil on the filter Qingdao compressor repair price should be in a solvent or without foam detergent in warm water to wash, where the filter was immersed in warm water for at least 15 minutes, and with a hose to wash in clean water carry, do not use it is heated to accelerate the drying method, a filter can be washed five times, then discarded can not be reused. d. Put a light inside the filter to check if found thinning, pinholes or damaged shall be abandoned at Qingdao Compressor overhaul _ Ke Pule compressor (certified) _ compressor maintenance from Xinjiang Ke Pule Compressor Co., Ltd. provided. Xinjiang Ke Pule Compressor Co., Ltd. (www.xjkant.com) is a leader in Urumqi, Xinjiang, industry-specific equipment, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Ke Pule compressor in leadership with the staff warmly welcome all inquiries negotiations to create a better future Ke Pule compressor. |
Admin>>>
You are the 16898 visitor
Copyright © GuangDong ICP No. 10089450, Xinjiang Ke Pule Compressor Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 16898 visitor
Copyright © GuangDong ICP No. 10089450, Xinjiang Ke Pule Compressor Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility